PUSHBUTTON OPERATOR

• For manual ON-OFF switching of encapsulated NZM10 breakers and switched equipped with a remote control drive.
• Not for use in conjunction with KVR-NZM10 mechanical interlock

PROTECTIVE FRONT DOOR CUTOUT

• Transparent cover to provide a panel cutout area with IP54 protections
• For use where the remote control drive protrudes from the cutout area of the enclosure door.

SEALING PLATE

•  Blocks off manual switching access of the remote control drive at the device.
• Electrical switching from a remote location and manual tripping of the circuit breakers (push to trip feature) are not affected.

TOGGLE SWITCH INTERLOCK

• Permits the OFF position of the toggle operator to be locked with up to 3 padlocks.
• Hasp thickness 6 - 8 mm.

INSULATING CUTOUT FRAME

• For use where toggle witch protrudes from the enclosure. Provides degree of protection IP 40.
• Affixed from the rear with screws
• Can be inscribed.

ROTARY DRIVE MECHANISM

• Converts ON and OFF switching from a vertical toggle movement to a rotary motion.
• Required for the use of rotary and door coupling/interlocking rotary handles.
• Can be locked in the OFF position with up to 3 padlocks.
• Hasp thickness 4 - 8 mm.

ROTARY HANDLE

• Black color.
• Requires rotary drive mechanism.
• Suitable for open mount switches.
• No door interlocking or padlocking provisions.

EXTENSION SHAFT 175-400mm

• For mounting depths in range of 175-400 mm
• Can be cut to length

EXTENSION SHAFT 260-600mm

• For mounting depths in range of 260-600 mm
• Can be cut to length

MAINTENANCE HANDLE

• For panel mounted switches.
• Push fits on to the extension shafts.
• Used to actuate the device when the panel door is open.

HANDLE FOR COVER/DOOR INTERLOCKING

• With cover interlocking and padlocking feature, rotary drive mechanism required.
• Can be locked in the ON and OFF position with up to 3 padlocks.
• Degree of protection: UL/NEMA 3R, 12; IEC IP55
• 3 distinct handle positions:
  OFF - + (tripped) - ON

SWITCH POSITION INDICATOR

• Indicates position of switch (OFF, tripped or ON) when panel door is open.
• To be mounted on shaft of rotary drive.

MAIN DISCONNECT SWITCH ASSEMBLY

(Kits for CE marked control panels per IEC/EN 60 204-1)

• NZM10-...-NA breakers and switched have dual UL/CSA and IEC/EN ratings. They are suitable for use as main disconnect switched in control panels that must be CE marked and designed to comply with Machinery Directive standard EN 60 204-1.
• Kit Contains:
  -Door coupling rotary handle
  -Rotary drive mechanism
  -Extension shaft for 400mm mounting depth
  -External warning plate
  -Black lightning symbol

MAIN DISCONNECT WARNING PLATES

• Main switch - Open only in OFF position
• Other languages are available.
   

MECHANICAL INTERLOCKS

• For mechanically interlocking two NZM10 circuit breakers or molded case switched mounted in a panel. Fits toggle operators or rotary drive mechanisms.
• R-NZM10 must be electrically interlocked at the same time.
   

MECHANICAL INTERLOCKS

• For mechanically interlocking three NZM10 circuit breakers or molded case switched mounted in a panel. Fits toggle operators or rotary drive mechanisms.
   

VERTICAL HANDLE ASSEMBLY KIT, UL 4X

• Each kit includes:
  -Flange mounted vertical handle
  -A flexible cable
  -Mechanical linkage operator
   

STANDARD TERMINAL COVER

• Suitable for cable lug terminals
• Supplied as standard with K2 x 240 (IP)
• Supplied as 1 terminal cover
   

3 POLE TERMINAL COVER

• One Piece, 3 pole terminal cover
• Suitable for K300 and K2 x 120